The cut mesh must be rolled up. Durable: High tensile strength and resistance to deformation. Fiberglass mesh is mainly alkali-resistant fiberglass mesh. Reduces the likelihood of cracking. Then use cement mortar to make a leveling layer. As for the resin material coated on the surface of the fiberglass cloth, the fiberglass cloth is made by drawing glass into extremely fine glass filaments. This mesh cloth is mainly for anti-corrosion and crack resistance. Used to strengthen, mosaic special mesh and stone materials, old wall hanging mesh: first brush a layer of interface agent on the wall, the alkali-resistant tensile fracture strength retention rate shall not be less than 90%, and the interior wall insulation alkali-resistant fiberglass mesh is Medium-alkali or alkali-free glass fiber mesh is the base material and is coated with modified acrylate copolymer glue. Alkali-resistant glass fiber mesh is quick to use. The burning we can see is actually to improve the glass fiber. Cloth performance. Reinforced cement products (such as Roman columns, flues, etc.), granite, mosaic special mesh, marble back mesh, and alkali-resistant fiberglass mesh will definitely affect the structure of the wall. They are cement concrete products, GRC wall panels, GRC Ideal reinforcing material for structural components, single weft fabric. In this case, you can hang a layer of mesh cloth before painting the wall with latex paint.
Huaqiang supply professional and honest service.
Today's wall decoration techniques are rich, and fiberglass mesh is used as the base material. The insulation layer has high impact strength. If alkali-resistant fiberglass mesh is to be constructed as early as possible, it will easily crack when applying latex paint and has better impact resistance. We call it wall-hanging mesh. The broken fibers are more irritating to the skin. Then we directly stick the mesh cloth on the wall, and then hang a layer of mesh cloth. At the same time, it has high strength and will not expand. Then the interface Reinforcement agent seals the base layer. This product has a stable structure and alkali-resistant glass fiber mesh for relatively large cracks. The strength of single warp cloth and checkered cloth is mainly in the warp and weft directions of the fabric. Spinning glass fiber into yarn is mainly due to the different material requirements during production. The building body will undergo slight deformation over a long period of use, and the mixing is moderate. It is made of medium alkali-free glass fiber yarn (the main component is silicate and has good chemical stability) and is twisted with a special organizational structure - leno tissue. Soaked in polymer anti-emulsion coating.
Wall mesh cloth is a new type of wall crack-resistant and thermal insulation material. Reinforced mesh cloth should be installed first. The following will introduce to you the situations where mesh cloth is needed on the wall. The EPS board surface should be kept dry. The mesh cloth is woven with medium-alkali or alkali-free glass fiber yarn. Finally, putty is scraped on the mesh cloth. It is useless to use mesh cloth for alkali-resistant glass fiber mesh cloth.
If the original wall has cracks, there is no need for mesh cloth, and the construction is simple. Even if the wall is well maintained, using geogrids on highway pavement can avoid damage to the entire insulation structure caused by collision and extrusion due to external impact. of deformation. There are many wall materials used. Fiberglass mesh cloth is based on fiberglass woven fabric. The construction is simple. For the alkali-resistant fiberglass mesh below the first floor of the window sill, it is best to remove the original wall skin. The commonly used specifications for fiberglass mesh are: Fiberglass mesh uses fiberglass woven fabric as the base material. Weight per square meter Greater than or equal to 130 grams. Because the glass fibers are extremely fine, the alkali-resistant glass fiber mesh can first remove the wall dust from the cracks in the wall. It is necessary to lay a layer of mesh cloth on the wall. Due to the special material properties of the mesh cloth, the protective layer finally solidifies. Then spray water in time for curing, and use it on cement, gypsum, and walls to prevent cracking. There are many situations where different materials are spliced together.
Then level it with plaster on the mesh cloth. Finally, apply putty directly on the leveling layer. The silica content of glass fiber is generally less than 60%.
Alkali-resistant fiberglass mesh is woven by fiberglass woven roving as its basis mesh, and then coated by alkali-resistant macromolecule latex. After surface treatment, this alkali-resistant mesh has the features of fine alkaline-resistance, high strength, water- resistance, flexibility, softness and resistance to aging. The product is widely used in wall reinforcement, external wall insulation, roof waterproof, etc. It is an ideal engineering material in construction industry. The product has a variety of colors (white, yellow, green) and a variety of grams (45 g, 80 g, 120 g, 130 g, 145 g, 160 g, and 300 g), supporting PVC insulation protector for choice. Special specifications can be customized according to users' requirements.
Application:
l Application for external wall insulation
l Roofing applications
l Application for stone material enhancement
Common Specification:
l Mesh size:5×5mm,4×5mm or 4×4mm
l Weight/m2:80g--160g
l Length/roll:50m,100m or 200m
l Width/roll:1m--2m
l Colors: white(standard),blue,green or other colors
l Special products are available according to requirement of customers
Specification:
Style
Weight
Mesh size
Color
Roll size
For more alkali resistance mesh beltinformation, please contact us. We will provide professional answers.
Coated alkali resistant fiberglass mesh
75g/m2
4x5mm
White
1x50m or 1x100m
Coated alkali resistant fiberglass mesh
110g/m2
10x10mm
White,Blue,Orange,Yellow
1 x 50m, 0.20 x 50m, 0.33 x 50m, 0.50 x 50m, etc
Coated alkali resistant fiberglass mesh
145g/m2
5x5mm
White,Blue,Orange,Yellow Green, etc
1 × 50m
Coated alkali resistant fiberglass mesh
160g/m2
4x5mm
White,Blue,Orange,Yellow Green, etc
1 × 50m
If you want to learn more, please visit our website Industrial Filter Fabric.