Had what I needed and delivered it quickly, what more can you ask for!
if you have an image of the product in use please also email to us at feedback@findtape.com
ANSWER : Although it isn't designed for that, you could apply it there. This product is similar to super wide and heavy duty electrical tape. If you are thinking to 'cap' the top side of a deck joist to prevent water from persisting there and causing rot, that would be a clever use of this material. Not sure what the UV exposure through the cracks would do to the tape, but it would probably last a long time.
ANSWER : You would probably want to look at a gaffers tape for cable hold down on a floor. Shurtape P-628 and P-655, Polyken 510 and Scapa 425 are all options. Thank you.
ANSWER : We asked Shurtape and they said, "if the room is 80 degrees and the water in the pipes is 55 degrees there will be some condensation." Thank you.
Warning: This product can expose you to chemicals including Diisononyl phthalate (DINP), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.
FindTape offers a wide selection of electrical tapes for home and industrial use. In addition to heavy duty, corrosion resistant pipe wrap tapes, you'll also find glass cloth tapes, PVC electrical tape and much more. Visit our Advanced Tape Finder or email us at questions@findtape.com for help in finding the right tape for your application.
Shurtape PW-100 Corrosion Protection Pipe Wrap Tape is a 10 mil thick extremely durable PVC tape that resists corrosion. It's designed to be used underground as wrapping tape for both metal and plastic pipes. Shurtape PW-100 is coated with a pressure-sensitive adhesive that's non-corrosive and has printing on the black film that clearly indicates this as PVC pipe wrap tape. Other key advantages of Shurtape PW-100 tape are conformability and exceptional moisture resistance.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
If you have any questions on Gas Pipe Wrap Tapes, PE Mechanical Protection Outer Tape, Pe Joint Tape,Joint Warp Pipe Tape. We will give the professional answers to your questions.