Denialink offers, new made and second hand, flexible rubber dredge hoses.
These dredge hoses are available in floating and non-floating series, with
internal diameters (ID�s) of 1200 mm for the new made ones and up to ID
600 mm for the second hand ones.
The new made dredge discharge flexible dredge hoses.
Rubber dredge hoses are purpose built to the special requirements of our
clients.
We are in the position to build dredge hose sizes ranging from 100 mm ID to
2200 mm ID.
Our designers will select the most appropriate materials from a wide
range of products available to us to meet service and demands requested
by our clients i.e. in regard to wear resistance, pressure ratings,
tensile strength, bending capabilities and so on.
In general the Rubber Dredge Hoses consist out of an inner lining
adjusted to the specific requirement of transported media.
Wear indicator layers can be implemented in the dredge hoses which transport
abrasive media.
A textile reinforcement of high tensile strength will control the
pressure resistance of the dredge hose as well as the tensile strength.
Where as the outer cover is built up by a rubber compound highly
resistant against weathering, UV lights and Ozone.
On special request the outer cover can be built with oil resistant
materials.
Dredge hose end fittings are available in a wide variety which are selected on
duty requirements.
Discharge Dredge
Hoses
Suction Dredge
Hoses
Floating Dredge
Hoses
Pre-Shaped Dredge
Hoses
Armoured Dredge
Hoses
The Second Hand Dredge Discharge Rubber Flexible Hoses
Denialink supplies a wide range of used (second hand) floating and submarine (non-float) rubber flexible hoses. The size of the internal diameters (ID) ranges from 24” (600 mm), 20” (500 mm), 16” (400 mm), 12” (300 mm), 10” (250 mm), 8” (200 mm) to 6” (150 mm). Other diameters and special requirements can also be supplied upon request and availability.
If you want to learn more, please visit our website wholesale resistant rubber dredger hoses.
These hoses proceed mainly from the oil industry and are manufactured under the strict requirements of the Oil Companies International Marine Hose Guide (OCIMF). Manufacturers like Dunlop, Trelleborg, Bridgestone, Manulli,, Good Year, Yokohama, and Emstec all manufacture their hoses with slight variations, but all according to the OCIMF guidelines.
Technical information given is of new build status.
TECHNICAL INFORMATION OF THE FLOATING DOUBLE CARCASS HOSES:
Fittings
Fittings are built-in with carbon steel weld neck flanges, drilled ANSI B. 16.5 - Class 150.
Construction:
If you are looking for more details, kindly visit polyethylene pipes price list.
Application:Suction dredging hose is designed for silt conveyance dredging operations. The flexible and easily installed dredging hoses are abrasion and kink resistant thanks to the synthetic materials combined with the helix steel reinforcement wire. The smooth interior of the hoses helps prevent clogs and avoids damage from the abrasive materials passing through.
Temperature:-25℃ to +80℃(-13℉ to +176℉）
Tube:Abrasive resistant synthetic rubber with high strength breaker plies and coated with a high grade synthetic rubber interior surface.
Reinforcement:High tensile strength fabrics with a steel inner structure. Fully embedded steel wire coils are incorporated to achieve kink, crush and local load resistance.
Cover:Synthetic rubber, resistant to abrasion, weathering, sea water and oil exposure. The cover, which incorporates reinforcing breaker plies is black with a bright orange spiral stripe or coated in tough bright orange polyurethane.
Want more information on hdpe dredging pipe? Feel free to contact us.